Product code IT-C250
Concrete air entrainment meter 8 L
Pressure-type air entrainment meter with an 8 L vessel for determining the entrained air content of fresh concrete.
- 24-month warranty and spare parts from stock
- Commissioning, staff training and methodological support
- Assistance with equipment certification as part of your laboratory
Description
The air entrainment meter determines the volume of entrained air in freshly placed concrete by the pressure equalization method: the built-in pump pressurizes the air chamber, and after the valve is opened the gauge reads the air content directly in percent.
The 8 L vessel made of hard-anodized aluminium is designed for mixes with aggregate up to 40 mm. The precision ⌀ 90 mm gauge with 0.1% graduations is protected by a rubber damper; a calibration vessel for periodic verification is included.
Features
- Direct air content reading of 0–10%
- 8 L hard-anodized aluminium vessel
- Built-in hand pump and two bleed valves
- Calibration vessel included
- Snap clamps with a lid seal
Technical specifications
| Vessel volume | 8 L |
|---|---|
| Measuring range | 0–10% |
| Graduation | 0.1% |
| Maximum aggregate size | up to 40 mm |
| Gauge diameter | 90 mm |
| Weight | 10.5 kg |
Reference standards
The equipment performs tests in accordance with the requirements of the following standards:
- GOST 10181
- EN 12350-7
- ASTM C231
You may also need
Related equipment
IT-C260
Standard curing chamber for concrete specimens
Climatic chamber for storing concrete specimens at 20 ± 2 °C and at least 95% humidity with automatic control.
IT-C210
Automatic compression testing machine 2000 kN
Automatic servo-hydraulic machine for compression testing of concrete specimens with a touch-screen controller and PC software.
IT-C215
Flexural testing device 100 kN
Attachment for 1500–3000 kN machines for flexural tensile testing of concrete beams with its own 100 kN load cell.
IT-C218
Set of distance plates and spacers for compression machines
Set of hardened distance plates for testing 70–150 mm cubes and cylinders on IT-C series machines.